1 / 3
Schwalbe Clik Valve to Topeak Smartgauge D2 adapter — zdjęcie 1
1 / 3

Schwalbe Clik Valve to Topeak Smartgauge D2 adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a Topeak Smartgauge D2.

Ocena
5 / 5
Polubienia
10
Pobrania
60
Wydruki
0
Wyświetlenia
327
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a Topeak Smartgauge D2. The Schwalbe / SKS CLIK Valve SCV pump head adapter is also required: https://www.sks-germany.com/en/Products/Pumps/CLIK-TEC-Adapter-for-Pump-Heads.htm?a=article&ProdNr=12068&p=1008

The grey cap on the valve inlet of the Topeak Smartgauge must be removed. It's screwed on and can therefore be easily removed. Don't forget: the gray rubber plug inside must be inserted into the printed adapter.

The upper part of the Schwalbe / SKS CLIK Valve SCV tire pump head adapter (rubber-coated) can be easily unscrewed from the lower part with the Schrader adapter (threaded part). When assembling the printed adapter, it is important to reinsert the small rubber seal which is located inside!

Before screwing on the adapter, switch the Topeak Smartgauge to Presta valve.

I printed the adapter on my Core One with a layer height of 0.1 mm.

For information: The threads of the Schwalbe / SKS CLIK Valve head is 0.5 in x 1 mm 😉 and of the Topeak Smartgauge M18x1.

Tagi