1 / 3
Schwalbe Clik Valve to Topeak Smartgauge D2 adapter — image 1
1 / 3

Schwalbe Clik Valve to Topeak Smartgauge D2 adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a Topeak Smartgauge D2.

Rating
5 / 5
Likes
10
Downloads
60
Makes
0
Views
327
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

An adapter for simple tire pressure measurement with a Schwalbe Clik Valve and a Topeak Smartgauge D2. The Schwalbe / SKS CLIK Valve SCV pump head adapter is also required: https://www.sks-germany.com/en/Products/Pumps/CLIK-TEC-Adapter-for-Pump-Heads.htm?a=article&ProdNr=12068&p=1008

The grey cap on the valve inlet of the Topeak Smartgauge must be removed. It's screwed on and can therefore be easily removed. Don't forget: the gray rubber plug inside must be inserted into the printed adapter.

The upper part of the Schwalbe / SKS CLIK Valve SCV tire pump head adapter (rubber-coated) can be easily unscrewed from the lower part with the Schrader adapter (threaded part). When assembling the printed adapter, it is important to reinsert the small rubber seal which is located inside!

Before screwing on the adapter, switch the Topeak Smartgauge to Presta valve.

I printed the adapter on my Core One with a layer height of 0.1 mm.

For information: The threads of the Schwalbe / SKS CLIK Valve head is 0.5 in x 1 mm 😉 and of the Topeak Smartgauge M18x1.

Tags