Cenmate 4 Bay DAS 90mm Fan Backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Custom backplate for the Cenmate 4 bay esata and USB DAS. It extends a little ways to accommodate a 90mm fan.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the 80mm version.
I had to move the location of the power switch in order to accommodate the larger fan. The switch does still reach the connectors, but it is tight. I bent the leads to the switch a little bit to help, which I recommend.
For the fan to connect to the PCB, I spliced on a two pin connector. That still ran a little loud because the fan was at full blast so I splice a Noctua NA-SRC7 in between which made it perfect!
I was also even able to remove the sticker from the original backplate and apply it to this new one!
Printing this was very easy. Just makes you use supports.
Please post your makes and let me know if anything needs improvement.
Thanks!