Stacked openGrid Lite base plates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stacked openGrid Lite base plates; sizes from 4x4 to 9x9, stacks from 2 to 9. (Smallest: 4x4x2, Biggest: 9x9x9)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Stacked openGrid Lite base plates. Plate sizes range from 4x4 to 9x9, and stack heights range from 2 to 9. The base plates were generated with the Perplexing Labs openGrid Generator and stacked using a custom Python script. Plates have been rotated face down to allow for stacked printing.
Note: This does NOT use multiple materials! Stack layers will need to be pried apart. Surface finish for all but the bottom layer (that touches the build plate) will NOT be smooth. See photos for example.
If you are using STLs instead of the provided 3MF files, you MUST configure the necessary print options for stacking to work:
no supports
enable ironing for all top surfaces
These additional options will improve the surface finish:
bridge flow ratio 1.4
overhang flow ratio 1.4
extra perimeters on overhangs
if (and ONLY IF) this option is NOT available, enable thick bridges
📣 Updates:
2026-07-31 - All plates face down, tweaked print settings for better surface