Tesla Model X Buckle Raisers 6 seater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for my younger cousins who could buckle themselves but couldn't keep the seat belt buckle raised.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this buckle raiser for my younger cousins, who were old enough to buckle themselves but struggled to keep the seat belt buckle upright and within reach. It makes fastening the seat belt much easier and encourages greater independence while reducing frustration.
The model is designed specifically for the Tesla Model X 6 Seater and features a simple, sturdy one-piece design that prints without supports on most FDM printers.
This model slides into the buckle cavity to keep the seat belt buckle upright and easily accessible. It should be removed before folding the third-row seats flat.
Recommended print settings:
Material: PETG (recommended) or PLA
Layer height: 0.25 mm
5 walls, top and bottom layers
20% infill (Gyroid or Cubic)
No supports required
Disclaimer: This model is provided for personal use. Always verify that the seat belt latches and releases correctly after installation, and inspect the printed part regularly for wear or damage. It is not a certified automotive safety device.