Heavy-Duty VESA Monitor Mount for ANMITE 16" and Ender 3 S1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Heavy-duty VESA monitor arm for the ANMITE 16" touchscreen, designed to mount directly to the Ender 3 S1 frame.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a clean and rigid way to mount my ANMITE 16" touchscreen using its VESA mount directly to my Ender 3 S1.
Instead of using a desk stand, I designed a heavy-duty VESA monitor arm that bolts directly to the printer frame while remaining fully compatible with the excellent Multifunction Arm Mounting System by the original author.
The arm is mounted at approximately 45° and keeps the display close to the printer without noticeable flex during normal use.
Although my monitor weighs only about 1 kg, I tested the printed arm with approximately 4 kg of static load, which it handled without failure when printed in PETG using the settings below.
Printing Recommendations
Material: PETG (recommended) or any stronger material
Layer Height: 0.20 mm
Initial Layer Height: 0.24 mm
Perimeters (Walls): 5
Top Layers: 8
Bottom Layers: 8
Infill: 25% Cubic
Supports: Required only in one small area (see the screenshot)
Compatibility
Ender 3 S1
ANMITE 16" Touchscreen Monitor
Compatible with the Multifunction Arm Mounting System interface
Hardware
Reused small holder from the original Multifunction Arm Mounting System.
The arm is fixed directly to the Ender 3 S1 frame using standard M5 hardware.
Notes
This arm is only one part of the complete assembly.
To mount the monitor, I combined three separate models:
This remix - the heavy-duty frame arm for the Ender 3 S1.
Multifunction Arm Mounting System by the original author, which provides the modular arm interface and adjustment mechanism.
VESA 75 Mount for ANMITE 14" Portable Screen, which allows the ANMITE monitor to be attached to the multifunction arm using the standard VESA 75 mounting pattern.
This remix only replaces the structural arm that mounts directly to the Ender 3 S1 frame. The other two models are required to complete the assembly.
Many thanks to the original designers for creating these excellent models that made this project possible.