TP-Link ES210X-M2 10in 1U Rackmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ES210X-M2 flush, friction-fit mount for a 10-inch 1U rack.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Flush, friction-fit mount for a 10-inch 1U rack.
The 2x2mm side airflow openings are fully modeled into the design.
I printed with PETG on Flashforge AD5M without support.
Recommended print settings:
0.20 mm or 0.25mm layer height
Adaptive layer height also works well
Layer heights that do not divide evenly into both the 2 mm and 3 mm features may cause the airflow openings to print less cleanly or become slightly misaligned.
I recommend adding a little double sided tape to the back corners. Should help with both the friction fit and PETG warping over time.
This is my first fully from-scratch model. I’m open to constructive advice and feedback, just keep it civil.