Wide Vacuum Nozzle for Crossgun Turbo Fan Blower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wide fan-shaped nozzle for the vacuum attachment of the Crossgun X6 Pro blower.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A wide fan-shaped nozzle for the Crossgun blower's vacuum attachment. Clears a whole desk in a fraction of the passes.
What you get
Fans out from the round attachment port to a 125 mm wide mouth
Roughly 5x the coverage width of the stock slot nozzle per pass
Internal ribs run from throat to lip, so airflow spreads across the whole opening instead of concentrating in the middle
Nozzle size 125 x 75 x 16 mm
Fit check
Crossgun X6 Pro, the round intake port of the clear vacuum canister accessory
Friction fit, verified on my own unit — slides on and stays put
Desk and workbench cleanup: eraser dust, crumbs, filament scraps, support debris
Print settings
FDM, PLA or PETG.
0.2 mm layers / 2 walls / 15% infill
No supports needed — print lying flat on the wide face
Bambu Studio P1S project file included, plus a plain STL
Support me
If this design was useful to you, you can buy me a coffee ☕
Need a different size?
STEP file is included, and the full Onshape source is public: Onshape document
LICENSE: CC BY-NC