M3 Heat Insert Lower Plate and Cover for SFF Mini ITX Steam Machine Case v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added M3 heat inserts instead of self tapping screws for case assembly. Uploaded at original author's request.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I kept cracking the screw holes on this case during my build, so I remodeled the lower plate and outer cover to use M3 heat inserts for easier assembly and disassembly. I used standard M3x5x4 inserts (8 on the outer cover, 4 on the outer lower plate, for 12 total) except on the 4 motherboard mounts where I used 4 M3x3.5x4.6x6 flanged inserts because I had some extras lying around. I'm sure the standard heat inserts will work as well. I used 6 M3x8 SHCS to secure the back, and 6 M3x6 BHCS to secure the front. Don't torque them too much or you can rip them loose.
I probably could have done more to enforce the areas around the inserts, but this was a quick remix and it worked for me on the first try, so I didn't do more than the first iteration. Feel free to improve on the design.
Update 9/30/26: Added model for non vented cover. Added models for vented lower plate (separate models for older 200mm version and newer 203mm version).