M3 Heat Insert Lower Plate and Cover for SFF Mini ITX Steam Machine Case v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added M3 heat inserts instead of self tapping screws for case assembly. Uploaded at original author's request.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 62
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I kept cracking the screw holes on this case during my build, so I remodeled the lower plate and outer cover to use M3 heat inserts for easier assembly and disassembly. I used standard M3x5x4 inserts (8 on the outer cover, 4 on the outer lower plate, for 12 total) except on the 4 motherboard mounts where I used 4 M3x3.5x4.6x6 flanged inserts because I had some extras lying around. I'm sure the standard heat inserts will work as well. I used 6 M3x8 SHCS to secure the back, and 6 M3x6 BHCS to secure the front. Don't torque them too much or you can rip them loose.
I probably could have done more to enforce the areas around the inserts, but this was a quick remix and it worked for me on the first try, so I didn't do more than the first iteration. Feel free to improve on the design.
Update 9/30/26: Added model for non vented cover. Added models for vented lower plate (separate models for older 200mm version and newer 203mm version).