Klein KNECT Modbox MOLLE Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small Mounting Plate for Molle Panels
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Klein KNECT Modbox MOLLE Mounting Plate
The mounting can be a bit difficult. I designed this with low profile nylon lock nuts. I used fine thread as it was easier to thread with the nylon nut. You can use 1/4"x20 but expect it to be more difficult to thread the nut on. It will also be difficult if you don't have access to the back of the panel. I am not sure if this would work on soft panels.
Material Needed
Tapered 1/4"x28-3/4" length screw
Low Profile (Thin) nylon lock nut - 1/4"x28
1 - Knect+Small+Plate-Molle Mount
2 - Sliders
2 - MOLLE Mount v2
Print settings no support needed any of the prints.
I suggest 6 walls as it will print solid.
Do not print with PLA if it is going into the interior of a vehicle.
Print in ASA or ABS.
ABS Orange from Inland seems to be a perfect match for the Klein Orange.