Klein KNECT Modbox MOLLE Mounting Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small Mounting Plate for Molle Panels
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 18
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Klein KNECT Modbox MOLLE Mounting Plate
The mounting can be a bit difficult. I designed this with low profile nylon lock nuts. I used fine thread as it was easier to thread with the nylon nut. You can use 1/4"x20 but expect it to be more difficult to thread the nut on. It will also be difficult if you don't have access to the back of the panel. I am not sure if this would work on soft panels.
Material Needed
Tapered 1/4"x28-3/4" length screw
Low Profile (Thin) nylon lock nut - 1/4"x28
1 - Knect+Small+Plate-Molle Mount
2 - Sliders
2 - MOLLE Mount v2
Print settings no support needed any of the prints.
I suggest 6 walls as it will print solid.
Do not print with PLA if it is going into the interior of a vehicle.
Print in ASA or ABS.
ABS Orange from Inland seems to be a perfect match for the Klein Orange.