Universal Ceiling Light Spacer Ring for Surface-Mounted Cables
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer ring for ceiling lights with surface-mounted cables. Prevents cable pinching and creates clearance.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Many ceiling lights are designed for flush-mounted (concealed) electrical wiring. If your electrical installation uses surface-mounted conduit or cable, the cable is often pinched between the ceiling and the light canopy, preventing the fixture from sitting flush.
This spacer ring creates the necessary clearance between the ceiling and the light canopy, allowing the cable to pass safely underneath while maintaining a clean and professional appearance.
It also provides additional space for standard mounting brackets if required.
Designed from scratch in Fusion 360 and successfully tested in my own installation.
Features
Ideal for surface-mounted electrical cables
Prevents cables from being pinched
Creates extra space behind the ceiling canopy
Clean and minimal appearance
Prints without supports
Easy to customize for different diameters
Printing
0.20 mm layer height
4–5 perimeters recommended
20–40 % infill
PETG recommended
No supports required
Disclaimer
This is a spacer only and must not be used as a structural mounting component. Always ensure that the light fixture is securely attached to the original mounting bracket according to local electrical regulations.