1 / 4
Desk Monitor Stand Legs (DIY Riser)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to make a small monitor riser for a secondary desk. I just used a small (17x30cm) melamine board and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this to make a small monitor riser for a secondary desk.
I just used a small (17x30cm) melamine board and two legs but you can print more legs and use a bigger board.
Each leg has two 8mm holes (I made them in hexagon format so they print well).
This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using a different printer or slicer, import the 3MF as a model only to avoid incompatible printer settings.