Zodiac Valve Adapter for SUP Pumps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D‑printed adapter allows you to inflate older Zodiac inflatable boat valves using any standard SUP pump.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Open Community License v1.1
Zodiac Valve Adapter for SUP Pumps
This 3D‑printed adapter allows you to inflate older Zodiac inflatable boat valves using any standard SUP pump. It fits securely into the classic Zodiac valve system and provides a reliable seal for efficient air transfer.
Designed for the older fully recessed Zodiac screw valve, commonly used on Zodiac boats from the 1990s.
Features
Precise Zodiac fit — designed for older Zodiac valve geometry
SUP pump compatibility — should work with most manual and electric SUP pumps (tested on electric Lidl SilverCrest SUP pump)
Durable, print‑optimized design (tested in PETG)
Easy handling — insert, twist, and inflate
Seal groove for a 3 mm flat O‑ring
O‑Ring Options
The adapter requires a 3 mm flat O‑ring to achieve an airtight seal.
You can also print your own O‑ring in TPU (not tested yet, but I designed one nonetheless):
3 mm thickness
100 % infill, 0.15 mm layer height
TPU Shore 95A recommended (AI suggestion — not tested yet)
Notes
Works as a replacement for the original Zodiac inflation connector.
Suitable for both manual and electric SUP pumps.
Recommended print settings: 0.15 - 0.2 mm layer height, high infill for strength, supports enabled for the upper slot geometry.
use supports