Zodiac Valve Adapter for SUP Pumps
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.13 – €1.39 net (excluding VAT)
For file: zodiac_valve_adapter_0.4n_0.15mm_PETG_MK4S_1h13m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.26 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.21 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This 3D‑printed adapter allows you to inflate older Zodiac inflatable boat valves using any standard SUP pump.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Open Community License v1.1
Zodiac Valve Adapter for SUP Pumps
This 3D‑printed adapter allows you to inflate older Zodiac inflatable boat valves using any standard SUP pump. It fits securely into the classic Zodiac valve system and provides a reliable seal for efficient air transfer.
Designed for the older fully recessed Zodiac screw valve, commonly used on Zodiac boats from the 1990s.
Features
Precise Zodiac fit — designed for older Zodiac valve geometry
SUP pump compatibility — should work with most manual and electric SUP pumps (tested on electric Lidl SilverCrest SUP pump)
Durable, print‑optimized design (tested in PETG)
Easy handling — insert, twist, and inflate
Seal groove for a 3 mm flat O‑ring
O‑Ring Options
The adapter requires a 3 mm flat O‑ring to achieve an airtight seal.
You can also print your own O‑ring in TPU (not tested yet, but I designed one nonetheless):
3 mm thickness
100 % infill, 0.15 mm layer height
TPU Shore 95A recommended (AI suggestion — not tested yet)
Notes
Works as a replacement for the original Zodiac inflation connector.
Suitable for both manual and electric SUP pumps.
Recommended print settings: 0.15 - 0.2 mm layer height, high infill for strength, supports enabled for the upper slot geometry.
use supports