RD1000 4-Disk Vertical Storage Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact vertical holder for four RD1000 disks.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A compact and material-efficient storage holder designed for four RD1000 removable disks. The disks are stored upright, making them easy to identify, remove and return to their slots.
The holder is designed around RD1000 disks measuring:
Height: 126 mm
Width: 96 mm
Thickness: 31 mm
Each slot includes approximately 1 mm of total clearance for an easy fit. Continuous side edges prevent sideways movement, while the front and rear supports keep the disks securely upright.
Three bottom rails support each disk across its width without requiring a completely solid base. The front, rear and internal separator tabs feature matching 45-degree chamfers for a cleaner and more professional appearance.
The front includes a recessed RD1000 label.
Model dimensions
Capacity: 4 disks
Overall width: approximately 101 mm
Overall length: approximately 138 mm
Holder height: approximately 30.2 mm
Recommended print settings
Material: PLA or PETG
Layer height: 0.20 mm
Perimeters: 3–4
Infill: 15–25%
Supports: No
Orientation: Print upright with the base flat on the build plate
The model should print without supports.