Voron style X carriage for Mendelmax 3 LRU with BLTouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified X carriage for Mendelmax 3 that facilitates mounting Voron-style toolheads
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
The Mendelmax 3 LRU has an MGN12H on the front of the X gantry and belts on the top that are vertical. The carriage was modified from Voron's Design, so that the belts can be clamped one at a time at the top of the carriage and should not interfere with extruders.
There is room for a BLTouch mounted in the middle of the carriage per mahatmajman's mod, the mounting tabs need to be cut off. The BLTouch is wedged in by the clamp which has a heatset and a screw, the screwhead accessible via external hole so reverse rotation extends the screw out of the clamp and forces the clamp inwards against the BLTouch.
This carriage supports toolheads that follow the standard Voron Clockwork 2/TAP-style carriage mounting pattern - Stealthburner, Afterburner, XOL and A4T.
Dragon Burner, Rapid Burner and Yavoth have available mounts for Voron 2.4 and Trident carriages so may fit this too.
The Mendelmax 3 is about a decade old now. Maybe this will breathe life into some of them. If nothing else, it looks pretty cool mounting a Stealthburner on such an old machine.
The right carriage part needs a bit of work, I couldn't smooth over a section of it where it contacts the MGN12H.
