1 / 5
Meshtastic Seeed Studio Xiao ESP32S3 & Wio SX1262 1.3 OLED Revision — zdjęcie 1
1 / 5

Meshtastic Seeed Studio Xiao ESP32S3 & Wio SX1262 1.3 OLED Revision

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New revision of my prev remix. A Bit bigger case, bigger battery, 3 button at front, more ventilation, charging module..

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The revision I made:

  • A bit bigger case

  • Up to 2500 mAh 104050 battery

  • 3 button at the front

  • More ventilation holes

  • Additional charging module holder (TP4057, IP2312)

  • For Xiao board fixation now use screws

  • Room for a thin circular plate with a diameter of 20 mm

Battery: up to 2500 mAh Lipo (104050) battery.

Slide Switch: In the original design, it use a sub-miniature or micro-miniature (or something like that) slide switch, alternatively you can use a switch with the SS12F15 type (main body length around 10-11 mm and width/depth 5-6 mm) with a maximum stem length of 5 or 6 mm (The length of the switch guard is 6 mm so don't exceed it).

Button: I recommend tactile button with total height of 6 mm, which I think are easier to press than 5 mm. If use 7 mm it might be too long and likely prone to accidental press.

Heatsink: I also made room for a thin circular plate with a diameter of 20 mm and use some small thermal pad.

Screw: Only for slide switch and Xiao board. All use M2x4 mm screws. The rest still use hot glue. :))

Charging module: You can add an additional charger module by installing it on the back case, just choose the one that suits the module you will use, currently I use a mini TP4057 module like this, there is also one for IP2312 module (more efficient and doesn't get hot) but I didn't have time to try whether the size is right, so please try it and adjust it yourself.

Tip: Keep the 2.4 GHz antenna (WiFi/BLE) away from the battery as it will significantly impact the stability of the Wi-Fi connection. (Based on personal experience).

For the rest explanation, you can check on the previous model or the original design.

Tagi