Meshtastic Seeed Studio Xiao ESP32S3 & Wio SX1262 1.3 OLED Revision
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New revision of my prev remix. A Bit bigger case, bigger battery, 3 button at front, more ventilation, charging module..
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The revision I made:
A bit bigger case
Up to 2500 mAh 104050 battery
3 button at the front
More ventilation holes
Additional charging module holder (TP4057, IP2312)
For Xiao board fixation now use screws
Room for a thin circular plate with a diameter of 20 mm
Battery: up to 2500 mAh Lipo (104050) battery.
Slide Switch: In the original design, it use a sub-miniature or micro-miniature (or something like that) slide switch, alternatively you can use a switch with the SS12F15 type (main body length around 10-11 mm and width/depth 5-6 mm) with a maximum stem length of 5 or 6 mm (The length of the switch guard is 6 mm so don't exceed it).
Button: I recommend tactile button with total height of 6 mm, which I think are easier to press than 5 mm. If use 7 mm it might be too long and likely prone to accidental press.
Heatsink: I also made room for a thin circular plate with a diameter of 20 mm and use some small thermal pad.
Screw: Only for slide switch and Xiao board. All use M2x4 mm screws. The rest still use hot glue. :))
Charging module: You can add an additional charger module by installing it on the back case, just choose the one that suits the module you will use, currently I use a mini TP4057 module like this, there is also one for IP2312 module (more efficient and doesn't get hot) but I didn't have time to try whether the size is right, so please try it and adjust it yourself.
Tip: Keep the 2.4 GHz antenna (WiFi/BLE) away from the battery as it will significantly impact the stability of the Wi-Fi connection. (Based on personal experience).
For the rest explanation, you can check on the previous model or the original design.