IFÖ Aqua cister nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IFÖ Aqua 21 spare part. This part keeps the cistern lid in place and houses the flush button.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
The lip on the cistern nut broke and this did the job as replacement.
I tried replicating the part, it is not precise but it works. The thread took some tries to get right. It ended up as a kinda M20x1.5 with a height of 0.9mm. It is just one turn of thread and it ended just lagom.
The visible surface of my print came out a bit rough after removing supports. I only tried printing it in the orientation seen in the picture.
It is crucial though that it is printed with a 0.4mm nozzle due to the thread characteristics and a layer height of 0.1mm at the thread. I tried pushing it with a 0.6mm nozzle but with bad outcome.
I used PLA
Organic Supports ( None touching the thread )