IFÖ Aqua cister nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IFÖ Aqua 21 spare part. This part keeps the cistern lid in place and houses the flush button.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
The lip on the cistern nut broke and this did the job as replacement.
I tried replicating the part, it is not precise but it works. The thread took some tries to get right. It ended up as a kinda M20x1.5 with a height of 0.9mm. It is just one turn of thread and it ended just lagom.
The visible surface of my print came out a bit rough after removing supports. I only tried printing it in the orientation seen in the picture.
It is crucial though that it is printed with a 0.4mm nozzle due to the thread characteristics and a layer height of 0.1mm at the thread. I tried pushing it with a 0.6mm nozzle but with bad outcome.
I used PLA
Organic Supports ( None touching the thread )