Counting matching models…
I have designed these dispensers to use my batteries in first in - first out order. You can stand these up on the table, or hang up using a standard 4 mm countersank screw or attach their back to anything using glue or 3M's Command Tape…
A detailed Legend of Zelda bookmark, designed to be super thin and fast printing. No page damage, no hassle, just a cool design :) Test printed using an FDM printer. As I'm going for very thin layers, including the first layer, you'll…
Wall-mounted Hylian Wingcrest from the Legend of Zelda series. This was modeled by me based on a 2D image of the crest. The model includes a slot on the back so that it can be hung on a wall by a single nail.
You need to rotate your food cans (use the old ones first). This dispenser lest you always grab the oldest one first and top your stock up from the front. It does not need to be a prepper thing, because in general you are better off if…
Stackable FIFO can storage. Designed to hold 8 cans ~75 x 115 mm (3" x 4.5"). Two, probably three, can be stacked on top of each other. Printing No supports. I've printed 3 perimeters, 15% infill. Print each one of the walls on the back,…
Texture rolling pin for clays and epoxies. Can be used to create a pattern that's perfect for brick walls or floors. Great for miniature bases. You can run a small rod through the center to use as a handle. To avoid sticking, wet the…
Please download the original author's model here: https://www.printables.com/model/321247-hyrule-triforce-wingcrest-legend-of-zelda , which I had honestly forgotten that I had not made. My deepest apologies to the original author, Ian.…
Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…
Got a new print cooling fan, new filament or just curious about your printers overhang performance? This thing is the perfect benchmark to test just that. The part comes in multiple varieties depending on your needs and how thorough you…
So my dad asked me to design something to bring the hot air from the bottom heating exhaust of his California Ocean to the pop-top roof bed more efficiently. While I found several heating adapters for the bottom exhaust where you can…
Just slice and print. No supports needed.
Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .15 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot Compensation 0.15mm Supports None Additional Settings (Optional) Print External…
Inspired by other prints here, but decided to roll my own. This can hold 12 AA batteries in series to help load balance rechargeable batteries.
- The Cruciform Key - Added a version of the keys cut in half for printing flat. *EDIT* Update 20/08/23 Changed the model to reflect screen accuracy based on new images!
Just a simple Triforce. Because who doesn't want a Triforce??? Category: 2D Art
Remodeled this can holder from scratch to make a few key changes to the parent model: Model now nests so two halves of it can be printed on a single MK3s build plate, meaning you only need two print jobs to complete the unit, not 4.…
Inspired by other prints here, but decided to roll my own. This can hold around 16ish batteries in series to help load balance rechargeables.
FIFO Can Storage, designed for the IKEA IVAR 30 cm series, but compatible with any shelf at least 240 mm deep. Suitable for Ø75 mm cans. For assembly, cut 5 pieces from a Ø10 mm wooden dowel. Each piece should be 1–2 mm longer than the…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [UPDATED Dec 21, 2023] updated the battery removal area as @Runboy suggested, so…
California, USA (CA) Topographic Relief Map with Rivers and Coastal Waters California, USA mountains, coastlines, streams, and lakes in a dual or single color topographic and hydrographic map! All topographic states in the USA of Plastic…
Updates June 6, 2021: Improved the slicing options to result in softer feet Added a much larger version of the feet for increased dampening Description I designed these feet as a 1:1 replacement for the original feet on the Tefi KC-1 Ra.…
A silhouette of a california van for decoration
A set of ducting pieces for the Elegoo Centauri Carbon. Allows the silencing of fans and allows connection of ducting for external venting. Pieces are pushfit. Muffler drops case fan sound level by up to 10dB at source. Includes; manifold…
20% infill was more than enough; 10% is probably enough. I made the model to be carved with a CNC mill out of wood, and printed it out as a prototype.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
The model consists of - 1x left wall - 1x right wall - 3x connecting rods Dimensions can height: 110 mm - 115 mm diameter: 74mm Printing information - Printed in PLA - No supports are needed. - The left and right walls fill the entire…
Wanted a new keychain after my old one broke. This can be printed in solid colors or you can do a color change halfway through the print. both printed on a single nozzle printer.
This is a strap mounted blower to keep the fog out of a pair of airsoft goggles. Dissatisfied with my ExFog unit, I decided to build a small run of an improved design. My main complaints with the ExFog unit I bought were it was too…
Had a hard time finding an adapter or manifold to use 5015 fans in conjunction with 19mm CPAP tubing for a remote part cooling setup. The few I found wouldn't work with how I have my gantry set up, so I went ahead and modeled this one. So…
Purpose This print clamps aluminum sheet metal in-place. Clamping force is supplied by side-mounted magnets (6x2 mm). EDM Is a low-force process, meaning that little-to-no force is needed to hold the work piece in place. Side Flushing…
DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
This model is designed to print in four pieces on a decent-sized printer. The pieces have been sized to fit tight without any sanding, and gluing is optional. EDIT: I finally got around to printing the thing, and it ended up way bigger…
Children are amazing, and they get into everything! This is a childproof lock for Bifold Doors commonly used in closets and pantries. Just slide the out of the way along the top of the doors to allow you to open them, and slide it back…
Tools you need: sharp knife and sandpaper to clean the prints from strings. CA glue 2mm drill Screwdriver Material and settings: I reccomend LW-PLA 1 perimeter 2 bottom and top layers 6% gyroid infill The hinges print with TPU. Only one…
Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max). The files provided are only for the left side and need to be mirrored in the slicer for the other side. Print settings: Infill=15% gyroid /Layer…
Sink strainer for VW California T5/T6 This is a remix of the Kitchen sink basket strainer from LoboCNC. I've reconstruct it from scratch to fit to the VW California T5/T6 kitchen. Followed these print instructions: The trick to printing…
A Legend of Zelda Triforce Cookie Cutter. Have fun! "The Triforce […] is a fictional divine artifact from Nintendo's The Legend of Zelda series of video games. Referred to as "The Golden Power" in ancient Hylian literature, it represents…
Tube for filling Volkswagen T5 water reservoir. Flat side for easy storage and printing. It might fit other models but not yet tested. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
Introducing stand for the Master Sword, incorporating a Triforce motif. This model remixes the DUMMY 13 Master Sword, focusing on functionality and aesthetic enhancement. The stand is engineered for stability and durability. Ideal for…
Cette spatule spécialement conçue est l'accessoire indispensable pour tout utilisateur d'imprimante 3D. Elle vous permet de retirer délicatement et efficacement les objets imprimés du plateau, minimisant ainsi les risques d'endommagement.…
A stylish battery holder for AA, AAA, or 18650 batteries that is first-in first-out. This is a parameterized OpenSCAD model. If you want to do AAAA or C cells, you should be able to measure the batteries and change the parameters in the…
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE TRIFORCE LOGO THE LEGEND OF ZELDA KEYRING Embrace the power of Hyrule with the 'Triforce Logo The Legend of Zelda Keyring'. This elegant 3D model features the iconic Triforce symbol,…
Earrings in the shape of the Triforce artifact from The Legend of Zelda. Power, Wisdom, Courage! Print one for each ear! The earrings in the photo were printed with Noulei Silk Antique Gold, and the top surface was ironed with Cura. The…
Bring some order to your desk with this Police Uniform Pen Holder ! This detailed model reproduces an officer's bust, complete with tactical gear: badge, radio, pockets, and a utility belt with a holster. It is the perfect accessory to…
I've never actually played a Legend of Zelda game in my life but I am aware of the significance of the Triforce symbol. So here's a Triforce coaster for you to print! Just change filament color above 2mm.
I wanted to have paper towel holder that slides in the slot on the side of the bed. Easy to insert, no tools required. You will need two side pieces( printed mine without top/bottom layer and kept just the hex infill) and two pieces for…
I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I…
Should be printed in ABS or ASA as otherwise PLA or PETG will warp in heat. Fits on with some double sided tape
print out 6 of these and glue to the master blade.
DISCLAIMER: The original model was made for the game Satisfactory (I highly recommend btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
VW T5 / T6 California - Kitchen Hook 7.7.2018 - added 15mm width Print Settings Printer: Multec Multirap M420 2Move Rafts: No Supports: No Resolution: 0.2mm Infill: 35% Category: Automotive
Simple Triforce with Goddess Symbols inspired by Zelda, double sided, prints flat. Fusion file included.
Since I use my California also as my daily driver, the fridge cannot stay open by it's gasspring. Not only will I get a heartattack when the lid slams shut (which will eventually happend during a trip). But it also puts to much stress on…
VW T5/T6 California - DualHaken Handgriff Fahrer Beifahrer Print Settings Printer: Multec Multirap M420 2Move Rafts: Yes Supports: No Resolution: 0.2mm Infill: 20% Filament: Multec PLA-HT Post-Printing ============= Um Kratzer am…
So, this is, to date, my largest and most complicated design/print yet! If you are like me and have cabinets full of canned goods - always be prepared! - you know what a hassle it is to keep those rotated so that the oldest cans can be…
hook for gear mounted on the headrest
hook for gear mounted inside the sleeping roof of the VW california
For use in the VW T5 / T6 California - foldable cup holder (kitchen piping rail). Assemble with M3 screws. Print Settings Printer: Multec Multirap M420 2Move Rafts: No Resolution: 0.2mm Infill: 15% Filament: Multec PLA-HT blue Category:…
Prints great without support. Needed a triforce themed key for a costume. My other key designs.
First-in-first-out can organizer and dispenser for efficient pantry storage of cans. Great for keeping your oldest canned goods up front to keep your stock rotating and fresh. I looked at a bunch of these, but the designs were all oddly…
🛠 Stauraumerweiterung für VW Grand California 600 – Honeycomb-Design Diese passgenaue 3D-gedruckte Stauraumerweiterung wurde speziell für die Betttaschen im VW Grand California 600 entwickelt. An der Seitenwand nahe der Hecktüren befinden…
Prints without support. Use something relatively temperature resistant for anything in cars.
On the bottom of the fridge in the California Coast/Ocean there sometimes forms ice that will make your grocerys stick to the floor and or disassemble. This is one solution for this first world problem. Just print two of these (one…
Einlegebodenhalter für VW T5 California (runde Noppe an der Rückseite) / Shelf Holder for VW T5 California (round nub at the backside) Suche nach/ Search for “Einlegebodenhalter VW T5 California” in OnShape.
I've shortened the model a bit (so that the build plate can be placed on the edge of the vat, instead of putting it inside), and enlarged its height by around 4mm so that users with new FW won't have to do anything apart from installing…
Der Schrankkorpus muss mit ABS gedruckt werden. Für die Front wird 3mm dickes Acrylglas benötigt. Jedes Frontelement wird mit 3 verdeckt angebrachten Scharnieren am Korpus befestigt und durch jeweils 2 Magnete verriegelt. Die 3 einzelnen…
Overview: Easily restock cans without needing keep a very large stock of cans that a lot of the other dispensers expect. Side-loading for First In-First Out and to make it easier instead of needing to load from the back (which isn't…
Separate key and gem models now available, just download “ MI7CruciformKey_NoGems_WHITE ”, “ MI7CruciformKey_NoGems_WHITE ” & “ key gem ”.
Hook for the C-rail of the campervan
Perfect for decoration or a trophy topper. This high-detail model may not survive being scaled down. Enjoy! Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
A model I made for the release of the anniversary of Zelda this year Check out my insta for more projects: @neyth_makes https://instagram.com/neyth\_makes Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
We're owners of a VW California T6. When you store tetra paks (orange juice, milk, other) at the bottom of the fridge, they have the tendency of getting wet and soggy due to water condensate. We saw commercial solutions which cost a small…
Design Concept The "Girl Whispering Uniform" STL model draws inspiration from dynamic and stylish anime figures, featuring a character in a school uniform poised in an elegant pose. The model aims to capture fluidity in form and…
This simple sliding locking mechanism should be enough to keep pets and younger children from opening your bifold doors. Can optionally be printed with a handle on one side or both. OpenSCAD file attached should allow a decent range of…
A nice little pendant that can serve many purposes: necklace, keychain, decoration, … . Show your love for science and Zelda with this gadget that will certainly start conversations. Would you like to remix this model to for example…
Remix of 3005083 (see above)- Added fixation behind aluminium cover Better fixation of the hook while the top roof is open Print Settings Printer: Mutirap 420 2 Move Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Multec…
Remixed Nimaid's untested "a014" fully rounded finger hole version and added a Triforce symbol. Still learning how to play, but as you can see in the video this version also has trouble with the high notes (C and D). Nevertheless, still a…
This is a template for a traditional style leather bifold wallet. It is recommended to use 3-4oz vegetable tan leather for something like this. Will need to cut out the following quantities of each template from your leather to have…
Loved Popandsicle's Master Sword design, but didn't see any horizontal display stands for that sword (or others) that I liked, so I thought I'd design a simple one that fits the Zelda theme! Simple design using 2 identical halves, and 2…
This is modeled after SuFu's idea, https://www.thingiverse.com/thing:952737 but is one piece and fully 3d printed. Set your first layer to 0.1mm thick(mesh bed levelling is a big help at this layer height), 105-110% of your normal first…
Bester Abluftkrümmer für deinen S1 - Seitlicher Ausgang - AD=100mm. Update: Auf Wunsch hinzugefügt, Datei für den original xTool Schlauch, welcher aufgeschoben wird: "Seitlicher Ausgang_originalSchlauch_AD74mm.obj" Konstruiert in FreeCAD…
A low-profile solution for affixing antifog to protective goggles. I really like the super-low profile airsoft eye protection options (such as the smith optic boogie ventilators), but they all suffer from the same severe fogging issue.…
Im VW California bläst die Warmluft der Raumheizung aus einem Lüftungsgitter an der B-Säule unten. Das original Lüftungsgitter hat die Lamellen nach unten ausgerichtet, so dass sich die warme Luft schlecht im Bus verteilt. Bei diesem…
smal hook for the smal piping rail inside the awning. Fits a lamp or other stuff
VW T5/T6 California - table hook - fits the integrated camping table Resolution: 0.2mm Category: Automotive
Sleeping roof shelf for both sides of the sleeping roof in a California T6.1. Fits into the roller shutter channel. Can be taken in/out easily or even left in place - the roller shutter will not close 100% but it is still ok to keep the…
The digital revolution is here! But our college and lab are still very much fans of trifolds for communications. Our trifolds are designed for US Letter. We wanted a way to wall-mount display some of our trifolds. We very much liked the…
Crests attached to the left arm of Hearslabyul school uniforms. Flat pin back (available online or at your local craft store) is required to attach it to a sleeve. Ribbon is not included. Print in any color/filament type and spray paint…
Multi port manifold for Micro plant irrigation system. It uses a standard Gardena/hozelock adapter on the garden hose. I have included a 4 port fused manifold. All port are active all the time the water is turned on. This model requires a…
Brompton and trifold bicycle clamp spring to hold the clamp plate in place print using TPU
An exhaust manifold that slips in behind the top edge of your goggles, no gluing or hole punching required. TPU recommended for safety reasons. Print with supports and exhaust hole touching bed. Route both tubes from the back of your…
Keep unwanted items from falling into your intake manifold when you've got your carb off. Very basic design, but it gets the job done. The “quick print” version has a thinner plate area and taller bolt tabs. It saves about an hour of…
A First-In-First-Out dispenser for food cans. Snaps together for hardware-free assembly. The modular design can be expanded to be as large and as small as needed. Please read the instructions before printing, as this design is quite large…
Inhouse designed and used in our print farm, tailored for use with 3" ducting , this adapter seamlessly integrates with P1S and X1C models, providing an efficient solution for expelling toxic fumes. Compared to other designs, ours…
Blank License Plate template for you projects 2mm thick. Add your own text on top for color change prints.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a Intake Manifold Spacer remix for the EJ20 Subaru Engine ( http://www.thingiverse.com/thing:2451310 ). There is two Intake manifold spacer on the EJ20 engine ; they are not the same. The second is the mirror of the first. On the…
V1 I designed and printed this to replace the existing pin for my bifold closet door. There was an extra gap at the top of the door, causing the existing pin to slide out of the track. The design is longer than the original to account for…
I wanted a way to connect a dust extractor to my Workbee CNC, band saw, and potentially a third tool (e.g. sander) without having to manually plug the dust extractor hose between tools. So I designed this three-way manifold with butterfly…
![#0047 [Improved] AAA and AA Battery Dispenser [FIFO]](https://media.printables.com/media/prints/342818/images/3114289_9dbb7532-1ed8-47a8-9f15-244d1a02d810/rl-20230114-007.jpg)
