FLsun Super Racer Raspberry Pi mount / mainboard spacer

This is an adaptor to fit a Raspberry Pi alongside the standard SKR V1.3 clone mainboard in the top electronics case.

The mainboard is moved into the centre of the case, with mounts added for a Raspberry Pi and buck converter.

The original mainboard cooling fan is mounted on its side.

A male to female USB extender is used to provide access to one of the Pi's USB ports from outside the printer for webcams. The adaptor is designed for thing to line up with the orginal USB slot in the metal case.

I'm using this for Klipper so I don't need access to the mainboard's SD card slot.

USB extension cable on Amazon: https://www.amazon.com/gp/product/B00P0ES0VC/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=teachingtech-20&creative=9325&linkCode=as2&creativeASIN=B00P0ES0VC&linkId=51b277a204e42437350d745979d37819

Raspberry Pi 4B on Amazon: https://www.amazon.com/gp/product/B00P0ES0VC/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=teachingtech-20&creative=9325&linkCode=as2&creativeASIN=B00P0ES0VC&linkId=2aa9f6cc290d5167b5719675520e9818

Buck converters: https://www.amazon.com/gp/product/B00P0ES0VC/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=teachingtech-20&creative=9325&linkCode=as2&creativeASIN=B00P0ES0VC&linkId=2aa9f6cc290d5167b5719675520e9818

The buck converter is powered by wires daisy chained from the 24V inout to the mainboard. The pi is then powered by the buck converter sending 5V into the GPIO pins as shown in this video: https://youtu.be/yW9ovo9CHi0

M3 bolts are used and thread is cut into the printed parts.

The Klipper conversion is covered step by step in this video: https://youtu.be/Cj7KpzbgExQ

Print Settings

Printer:

Artillery3D X1

Rafts:

Supports:

No

Resolution:

Infill:

20

Filament:

X3D Recycled PLA

red

Notes:

Category: 3D Printer Parts