FLsun Super Racer Raspberry Pi mount / mainboard spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adaptor to fit a Raspberry Pi alongside the standard SKR V1.3 clone mainboard in the top electronics case.…
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 97
- Makes
- 0
- Views
- 1,302
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is an adaptor to fit a Raspberry Pi alongside the standard SKR V1.3 clone mainboard in the top electronics case.
The mainboard is moved into the centre of the case, with mounts added for a Raspberry Pi and buck converter.
The original mainboard cooling fan is mounted on its side.
A male to female USB extender is used to provide access to one of the Pi's USB ports from outside the printer for webcams. The adaptor is designed for thing to line up with the orginal USB slot in the metal case.
I'm using this for Klipper so I don't need access to the mainboard's SD card slot.
USB extension cable on Amazon: https://www.amazon.com/gp/product/B00P0ES0VC/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=teachingtech-20&creative=9325&linkCode=as2&creativeASIN=B00P0ES0VC&linkId=51b277a204e42437350d745979d37819
Raspberry Pi 4B on Amazon: https://www.amazon.com/gp/product/B00P0ES0VC/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=teachingtech-20&creative=9325&linkCode=as2&creativeASIN=B00P0ES0VC&linkId=2aa9f6cc290d5167b5719675520e9818
Buck converters: https://www.amazon.com/gp/product/B00P0ES0VC/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=teachingtech-20&creative=9325&linkCode=as2&creativeASIN=B00P0ES0VC&linkId=2aa9f6cc290d5167b5719675520e9818
The buck converter is powered by wires daisy chained from the 24V inout to the mainboard. The pi is then powered by the buck converter sending 5V into the GPIO pins as shown in this video: https://youtu.be/yW9ovo9CHi0
M3 bolts are used and thread is cut into the printed parts.
The Klipper conversion is covered step by step in this video: https://youtu.be/Cj7KpzbgExQ
Print Settings
Printer:
Artillery3D X1
Rafts:
No
Supports:
No
Resolution:
200
Infill:
20
Filament:
X3D Recycled PLA
red
Notes:
This should justfit omn the bed of the Super Racer (with a skirt). It's probably easier to just use another printer with a square bed.
Category: 3D Printer Parts