Dry Box Spool Sled + Slide-In Desiccant Lid - Resized for 4L Cereal-Style Filament Containers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The excellent cereal-container dry box sled, resized to fit the smaller 4L cereal-style containers sold as filament stor
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a resize of the Cereal Container Dry Box Spool Sled to fit a different container than the original targets. The original fits the MCIRCO 4L set. Mine is sized for this container, sold on Amazon as a filament storage container - although with a pour spout in the lid it is very clearly a cereal box, which is funnier:
https://www.amazon.com/dp/B0FXGTZWX1
If your container measures about 208.5mm long inside with a bottom width around 76.5 to 77mm, this version should fit. The original is about 4 to 5mm too wide at the bottom for these boxes - I cracked one finding that out.
WHAT CHANGED
The sled body is pulled in to 72.4mm wide and 201.7mm long, with an extra trim at the hand-grip end where these containers taper. The hygrometer plate keeps its exact original shape, so the same mini hygrometers fit. The desiccant lid is resized with the identical transform so it still slides in under the side lips and sits flush, and its corners got a little extra clearance for an easy slide.
Everything works like the original: pour loose silica beads into the trough, slide the vented lid in from the low end until it seats flush, drop your spool on the rails, close the box. The lid keeps beads out of the spool and the tab at the handle end is your finger grip to slide it back out for recharging the beads.
WHAT YOU NEED
The container linked above (or any box matching the interior dimensions)
Loose silica gel beads
Two mini hygrometers (same ones as the original design)
PRINT SETTINGS
PETG, nozzle 247C, bed 55C (*or higher depending on your bed type*), 0.28mm layers, 0.4 nozzle, 2 walls, 7 percent infill
No supports, no brim
Full bed plate prints sled and lid together in about 3 hours
CREDIT
Remix of the Cereal Container Dry Box Spool Sled v1 by Isonumatic:
https://www.printables.com/model/1253399
License CC BY-NC-SA 4.0, remix permitted.