1 / 3
Victorinox 58mm Scale - Toothpick + Tweezer + Pin — zdjęcie 1
1 / 3

Victorinox 58mm Scale - Toothpick + Tweezer + Pin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A scale for a 58mm Victorinox Swiss Army Knife. Has two slots for a toothpick/tweezers and a side slot for a pin.

Ocena
0 / 5
Polubienia
6
Pobrania
38
Wydruki
1
Wyświetlenia
222
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a scale for a 58mm Victorinox Swiss Army Knife. It has two slots for any combo of small toothpick/tweezer/ferro rod and a slot on the side for a small pin. In the original I had a hard time pulling out the accessories with shorter nails so I made the scale a tiny bit thinner, and I had a hard time pulling out the pin as the pin head kept hitting the scale so I made the divot deeper and longer. The toothpick and tweezer should sit flush with the scale now and be a bit easier to access, and the pin should be easier to pull out and insert without hitting the side of the scale.

I also moved the logo down a bit to match with the placement of the original logo on the other side, and added a logo file so you can print it in a different colour and glue it in the logo cutout on the scale.

I used 0.1 layer height with 10+ walls or 100% infill, laying flat with logo side on the print bed. Adding supports may help with overhang on the pin divot but are probably not necessary. Use a holographic print bed to get the same carbon-fiber look as mine.

Tagi