Victorinox 58mm Scale - Toothpick + Tweezer + Pin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A scale for a 58mm Victorinox Swiss Army Knife. Has two slots for a toothpick/tweezers and a side slot for a pin.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 1
- Views
- 222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a scale for a 58mm Victorinox Swiss Army Knife. It has two slots for any combo of small toothpick/tweezer/ferro rod and a slot on the side for a small pin. In the original I had a hard time pulling out the accessories with shorter nails so I made the scale a tiny bit thinner, and I had a hard time pulling out the pin as the pin head kept hitting the scale so I made the divot deeper and longer. The toothpick and tweezer should sit flush with the scale now and be a bit easier to access, and the pin should be easier to pull out and insert without hitting the side of the scale.
I also moved the logo down a bit to match with the placement of the original logo on the other side, and added a logo file so you can print it in a different colour and glue it in the logo cutout on the scale.
I used 0.1 layer height with 10+ walls or 100% infill, laying flat with logo side on the print bed. Adding supports may help with overhang on the pin divot but are probably not necessary. Use a holographic print bed to get the same carbon-fiber look as mine.