VKAR Bison replacement front bushings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The VKAR Bison V2 is serious fun, and about half the price of the Helion it's based on. Only trouble is the weak…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
The VKAR Bison V2 is serious fun, and about half the price of the Helion it's based on. Only trouble is the weak wishbone connection: the bushing and pin. I broke both of mine and then two threaded rod replacements. Time to create a 3D printed alternative in Onshape. Sliced in Simplify3D and printed on a Prusa i3 MK3, these turned out perfectly. Yet to have a breakage since fitting them, plus fitment and change are much easier now.
Video of how they were designed and made, plus what this car is capable of: https://youtu.be/hoakxJzfZ10
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
30
Notes:
Four needed for front suspension. I recommend printing spares.
Post-Printing
Four are needed plus four M3 x 50mm (or longer) bolts, four M3 nyloc nuts and two M3 washers. Drill out hole with 3mm drill bit.
How I Designed This
Category: Mechanical Toys