1 / 2
Small Magnetic Gecko/Lizard Food or Water Feeder Cup — zdjęcie 1
1 / 2

Small Magnetic Gecko/Lizard Food or Water Feeder Cup

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small magnetic arboreal feeder cup station for pet reptiles (geckos/lizards).

Ocena
0 / 5
Polubienia
2
Pobrania
11
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Noncommercial

This is a small magnetic feeder cup that I made for my baby lizards to have an arboreal water bowl in Reptibreeze terrariums (hence magnets and not suction). However, it can certainly be used for any and all other small arboreal geckos/lizards.

I made it to fit very specific bowl and magnet measurements, so using other options may not fit properly. The cup size is very standard for small geckos so they should be easy to source.

Magnets: 30mm diameter x 3mm thick (1.26" x 1/8")
Cups: 0.5 oz, top diameter : 1.73''; bottom diameter: 1.37''; height: 0.7''

I printed with PETG. You can print both pieces with very little infill, but I advise adding additional top/bottom and walls to ensure the magnet section on the holder gets enough structure as it is quite thin.

You are welcome to make tweaks to this design so it can hold different cups and/or magnets, and you can upload your remixes. I ask that anything you use these for remains free for everyone. Please do not sell the model(s) or 3d prints of the model(s). 

Tagi