1 / 2
Small Magnetic Gecko/Lizard Food or Water Feeder Cup — image 1
1 / 2

Small Magnetic Gecko/Lizard Food or Water Feeder Cup

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A small magnetic arboreal feeder cup station for pet reptiles (geckos/lizards).

Rating
0 / 5
Likes
2
Downloads
11
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial

This is a small magnetic feeder cup that I made for my baby lizards to have an arboreal water bowl in Reptibreeze terrariums (hence magnets and not suction). However, it can certainly be used for any and all other small arboreal geckos/lizards.

I made it to fit very specific bowl and magnet measurements, so using other options may not fit properly. The cup size is very standard for small geckos so they should be easy to source.

Magnets: 30mm diameter x 3mm thick (1.26" x 1/8")
Cups: 0.5 oz, top diameter : 1.73''; bottom diameter: 1.37''; height: 0.7''

I printed with PETG. You can print both pieces with very little infill, but I advise adding additional top/bottom and walls to ensure the magnet section on the holder gets enough structure as it is quite thin.

You are welcome to make tweaks to this design so it can hold different cups and/or magnets, and you can upload your remixes. I ask that anything you use these for remains free for everyone. Please do not sell the model(s) or 3d prints of the model(s). 

Tags