Camera Top Handles + Cold Shoe Monitor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top Handles With Multiple Versions + Cold Shoe Mounted Phone Mount
- Ocena
- 5 / 5
- Polubienia
- 88
- Pobrania
- 249
- Wydruki
- 1
- Wyświetlenia
- 1448
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Upgrade your camera rig with this simple top handle designed for strength, comfort, and versatility. The ergonomic profile has a secure grip for handheld shooting while keeping weight to a minimum thanks to its hollowed out design.
The handle features multiple threaded mounting points along the top, making it easy to attach accessories such as monitors, microphones, wireless transmitters, or articulating arms.
Features
Lightweight
Ergonomic grip for comfortable handheld operation
Multiple top mounting points for accessories
Clean, low profile design
Compatible with standard camera mounting systems
Ideal for cinema, mirrorless, and DSLR rigs
Held 22.1 kg before giving out (PETG, 100% infil, diagonal prinring)
Print Settings
Supports: Required
Layer Height: 0.2 mm
Infill: 40–100%
Walls: 4–6 perimeters
Material: PETG, ASA, ABS, or Carbon Fiber Nylon
Assembly
Install the required threaded inserts or hardware (if your version uses them).
Attach the handle securely to your cage or mounting plate.
Verify all fasteners are tightened before use.
For mounting directly to the cage use a 1/4" 16 screw and a washer
Versions
Threaded
Not threaded (with holes)
Not threaded (without holes)
I am always open to suggestions and ideas!
Notes
I STRONGLY SUGGEST USING PROPER HARDWARE INSTEAD OF 3D PRINTED SCREWS
This model is intended for experienced makers. Always inspect your print before mounting expensive camera equipment. Use high quality print settings and appropriate materials if the handle will support a fully rigged camera.
If you print one, I'd love to see your build, feel free to post a make and share your setup!