Canadian Stamp Roll Dispenser – Gridfinity Compatible (1x1x7 and 1x1x8)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stamp dispenser for a roll of 50 Canadian Permanent stamps. Gridfinity compatible. No supports required.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple dispenser designed for standard rolls of 50 Canadian Permanent stamps (approximately 36 mm outer diameter × 24 mm inner diameter × 29 mm wide). It is Gridfinity compatible (available in 1x1x7 and 1x1x8) and requires no supports to print.
The roll feeds smoothly through the dispenser, making it easy to peel each stamp from the backing paper. It also keeps the roll securely in place so that the next stamp is at your fingertips when needed.
A few things to note:
The first two stamps and the last two stamps of the roll cannot be dispensed and need to be peeled off normally.
To insert or remove the roll, flip the dispenser upside down and remove the insert.
If the fit is a little too tight, you can put something narrow (like a pencil) through the hole to help lift the insert out.