Guitar Amp Mic Stabilizer for Sennheiser E609
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Horizontal brace to keep hanging amp microphones parallel with the cab.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Never struggle with an unruly xlr cable twisting your mic off axis ever again.
OR angle it to hold the mic off axis if that's how you roll.
Designed for the Sennheiser E609, but should fit any mic with a 21-23mm stem.
if your mic's stem has a smaller diameter, a couple wraps of electrical tape should do the trick if you're unable to edit the model yourself.
The E609 stem actually tapers from 22 to 20mm so you can slide or snap the brace on and find which height gives you the optimal grip.
Recommended to print in PETG with enough walls to completely fill the skinny flexible section in the center - thats 4 walls on a .4mm nozzle.
PLA will work fine, but may deform over time and lose it's grip.