Back case for Clockwork uConsole - passive cooler and fans
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ClockWork uConsole back cover with passive cooler for the Hackergadgets CM carrier board. Plus holes. And grilles.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Based on the amazing model from Street Finest.
A back cover for ClockWork uConsole with passive cooler or, in my case, with fans. You can fit 2 30mm fans inside.
It fits the Hackergadgets CM carrier board.
I added a lot of holes and grilles, and made it thicker and taller.
Several variations.
NOTE: I made this mostly for myself, using only PrusaSlicer for my modifications. So, the .3MF file is huge, with several parts merged together and modifiers all over.
There is a bug that does not allow you to export to one single .STL from the .3MF if it has negative modifiers. They never fixed it. That's why is a mess, and there is no .STL file. And the fix model by Windows is not doing anything, because the file became too complex.