Back case for Clockwork uConsole - passive cooler and fans
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ClockWork uConsole back cover with passive cooler for the Hackergadgets CM carrier board. Plus holes. And grilles.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Based on the amazing model from Street Finest.
A back cover for ClockWork uConsole with passive cooler or, in my case, with fans. You can fit 2 30mm fans inside.
It fits the Hackergadgets CM carrier board.
I added a lot of holes and grilles, and made it thicker and taller.
Several variations.
NOTE: I made this mostly for myself, using only PrusaSlicer for my modifications. So, the .3MF file is huge, with several parts merged together and modifiers all over.
There is a bug that does not allow you to export to one single .STL from the .3MF if it has negative modifiers. They never fixed it. That's why is a mess, and there is no .STL file. And the fix model by Windows is not doing anything, because the file became too complex.