Compak K6 (WBC) Doserless Chute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Doserless mod chute for a Compak K6 (WBC edition). Has a flap/lid to reduce mess. Easy to clean/rake remaining grinds.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This remix modifies the original unit to fit a Compak K6 (WBC edition) with a doserless mod.
I made the screw mounting holes vertically stretched as, at least on my model, the two screws are not at the same elevation (those whacky Italians!).
I added provisions for integrated magnets (8x2mm from memory) in the body and the flap, so that the flap can remain open for easier cleaning etc. I run my grinder with a slight tilt forwards, so needed a way to keep the flap open.
Use a piece of filament as the dowel through the hinges and melt/solder the ends. The fit is tight, but should loosen up with some use.
The design is available for anybody to copy/remix from the onshape source here (https://cad.onshape.com/documents/7b2c3bb02c1c8f36320b84f4/w/ae8a40ac4cfea8283d7c026b/e/86a660f18501bde46dc6c4c3)