1 / 8
SkadiSlim – The Budget-Friendly, Laser-Cut Pegboard System — zdjęcie 1
1 / 8

SkadiSlim – The Budget-Friendly, Laser-Cut Pegboard System

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Affordable 3mm laser-cut Skadis pegboard with a collection of 100% support-free 3D-printed bins, hooks & holders!

Ocena
0 / 5
Polubienia
10
Pobrania
7
Wydruki
0
Wyświetlenia
117
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
Updates

2026-10-18: Initial version

SkadiSlim

Let’s be honest: the original IKEA Skadis system is great, but pricing a few sheets of perforated wood like they are made of rare Scandinavian timber? No, thanks.

Welcome to SkadiSlim! I redesigned the classic 5mm grid into a sleek, ultra-affordable 3mm MDF version optimized for your laser cutter. It cuts fast, costs next to nothing, and organizes your workspace just as well.

🌟 Key Features

  • Ultra-Modular & Flexible: Available in various sizes and both Portrait (vertical) and Landscape (horizontal) orientations to perfectly fit your specific wall space.

  • Cost-Efficient: Uses standard 3mm MDF or acrylic sheets. A fraction of the cost of the commercial version.

  • 100% Support-Free: Every single 3D-printed accessory is engineered to print cleanly without any support material.

  • High Compatibility: Specially tailored hooks ensure maximum strength even on the slimmer 3mm material.


📦 What's Included in the Download?

1. The SkadiSlim Boards (Laser Vector Files)

A full matrix of SVG files covering multiple standard dimensions. Whether you want a compact desk organizer or a massive tool wall, just pick your size and orientation (Landscape/Portrait) and hit Start on your laser cutter.

2. The Wall Spacers (Laser vs. 3D Print)

To give your hooks proper clearance behind the board, you need a 15mm space from the wall. You have two options:

  • The Laser Route: Cut the included ring files out of your 3mm MDF. Glue 5 rings together per spacer.

  • The 3D Printed Route: If you hate gluing tiny wooden rings, just print the optional 3D-printable spacer.

3. The Accessory Ecosystem (3D Prints)

I didn’t just stop at the board. I am continuously uploading a growing collection of bins, shelves, and hooks tailored specifically for this 3mm system.


🛠 Printing & Assembly Instructions

📐 Preparing the Board (Crucial Step!)

After your laser cutter finishes its magic, grab a countersink bit or a larger drill bit.

  • You must countersink the mounting holes so your wall screws sit perfectly flush with the 3mm surface.

  • Why? Because protruding screw heads look terrible and will violently block your beautifully printed SkadiSlim hooks from sliding into place. Trust me on this one.

🚫 The Best Part: ABSOLUTELY NO SUPPORTS.

Because we all know that peeling support material out of a 3D-printed box is a specialized form of torture, every single accessory in this collection is designed to be 100% support-free.

To achieve this peak level of printing luxury, the mounting hooks are printed separately (flat on the bed, maximum strength, zero drama).

  1. Print your box or holder.

  2. Print the corresponding hooks.

  3. Grab a drop of superglue (CA glue) and attach the hooks to the back of the accessory.

  4. Mount it, use it, love it. Your printer, your trash can, and your sanity will thank you.

💡 Quick Settings

  • Board Material: 3mm MDF, HDF, or Acrylic.

  • 3D Print Settings: 0.2mm layer height, 2-3 perimeters, 15-20% infill. No supports.

  • Mounting: Ø 4 mm screws, Spacers are included


💼 Commercial Licensing & Inquiries

This project is published under the CC BY-NC-SA license


Happy making, and stop overpaying for pegboards!


Tagi