Ikea Brimnes TV Stand Shelf Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sliding track door design for the Ikea Brimnes TV stand shelves.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Child-Proof Sliding Mesh Doors for IKEA Brimnes TV Stand (Bypass Track System)
Stop toddlers from poking buttons, grabbing gaming consoles, or pulling cables out of your media console—100% hardware-free!
Designed specifically for the top shelf openings of the IKEA Brimnes TV Bench (~22.75 in / 577 mm wide), this system uses a 2-Door Sliding Bypass Track with breathable 3D-printed mesh panels. No drilling, screws, or permanent modifications to your furniture required!
Features
100% Toddler-Proof: Keeps curious hands away from expensive electronics.
Zero Screws Required: Assembly uses E6000 glue for the panel seams and 3M tape for the tracks—no hardware needed!
IR & Airflow Friendly: Open mesh pattern allows IR remotes to work through the doors and prevents consoles from overheating.
Smooth Sliding: Doors slide smoothly left and right on a double-channel track for ~50% shelf access at a time.
Materials Required
Adhesive (Panels): E6000 Glue (highly recommended for strong, flexible plastic bonding) or Super Glue / Plastic Epoxy.
Adhesive (Tracks): 3M Command Strips or 3M VHB Tape to secure tracks to the ceiling and floor of the shelf.
Print Quantities & File Breakdown
Print Bed Volume Required: 250 mm × 250 mm (e.g., Bambu Lab, Elegoo Centauri Carbon, Prusa MK3/MK4).
Parts to Print:
Panel_Half_A.stl — Print 4 (Half of a door assembly)
Top_Track.stl — Print 2 (Rotate 45° diagonally to fit on a 250 mm bed)
Bottom_Track.stl — Print 2 (Rotate 45° diagonally to fit on a 250 mm bed)
Slicer Instructions (If NOT using the pre-configured .3MF)
If you are slicing the raw .STL files manually in OrcaSlicer or PrusaSlicer, follow these steps to achieve the mesh effect with solid borders:
1. Track Profiles
Print Top_Track and Bottom_Track normally with standard solid settings (15–20% Infill, 3–4 Wall Loops, 3 Top/Bottom Shell Layers).
2. Panel Halves (Panel_Half_A)
Note: DO NOT set global Top/Bottom layers to 0, or your overlapping glue flap and outer frame will become hollow!
Global Settings (Base Model):
Top Shell Layers: 3 or 4
Bottom Shell Layers: 3 or 4
Wall Loops: 3 or 4
Add a Local Modifier Box:
Right-click the panel STL in the object list → Add Modifier → Box.
Scale and position the box modifier so it covers ONLY the inner window area of the door panel. Keep it safely inside the outer frame and leave the overlapping glue flap untouched.
Override Modifier Settings:
Select the Box Modifier in the object tree.
Top Shell Layers: 0
Bottom Shell Layers: 0
Sparse Infill Density: 35% – 45%
Sparse Infill Pattern: Triangles, Tri-Hexagonal, or Gyroid
Infill Speed Warning: Cap infill speed to 100–120 mm/s on high-speed printers to prevent fine mesh lines from tearing during extrusion.
Assembly & Installation
Glue the Panel Halves:
Apply a thin layer of E6000 glue (or CA glue/epoxy) along the overlapping half-lap step joint connecting
Panel_Half_AandPanel_Half_B.Clamp or press firmly together and let fully cure.
Mount the Tracks:
Apply 3M Command Strips or VHB tape along the flat top face of
Top_Trackand bottom face ofBottom_Track.Press
Top_Trackagainst the ceiling of the TV bench shelf.Press
Bottom_Trackdirectly below it on the shelf floor, ensuring the two tracks align parallel.
Insert Doors:
Slide the doors into the channels from the side ends of the tracks before mounting, or pop them into place prior to final track adhesion.
Maker Notes & Future Revision Roadmap
3M Tape Clearance Tip: The current door height fits tightly inside the tracks. Because 3M adhesive strips add ~2 mm – 3 mm of extra thickness to the top and bottom track heights combined, lift-and-remove clearance is tight in this build. If you want the door to easily lift up and unhook from the bottom track, scale down the door's total height by 2 mm – 3 mm in your CAD software or slicer before printing.
Future Updates: Upcoming revisions will include a pre-adjusted door height profile specifically tuned for 3M tape offset, as well as an optional snap-on center child-locking clip/latch!