1 / 1
Horizon Hobby Carbon Cub S2 1.3m Seaplane Floats — zdjęcie 1

Horizon Hobby Carbon Cub S2 1.3m Seaplane Floats

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D Printed alternative to the float set Horizon Hobby offers for the 1.3m Carbon Cub S2 R/C plane.

Ocena
4 / 5
Polubienia
5
Pobrania
41
Wydruki
0
Wyświetlenia
278
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

3D Printed alternative to the float set Horizon Hobby offers for the 1.3m Carbon Cub S2 R/C plane. 

- Assembly Instructions

  1. Print all parts from the Full Float - Carbon Cub.step file twice. You should have a total of eight parts resulting in two symmetrical floats.

  2. Assemble the two floats with super glue, preferable expanding gorilla glue. DO NOT fill floats with expanding polyurethane as the added weight will bog down the plane, making it IMPOSSIBLE to take off.

  3. Print 4x of the Float mounting brackets.step.

  4. Attach mounting brackets to existing landing gear struts and install the additional back struts included with the airplane.

  5. Mount the floats as you see fit using the screw of your choice. I suggest trying a couple different locations on the floats. I found placing the plane farther back on the floats helped negate the prop slapping the water during takeoff and taxi. Overall the middle of the floats should be behind the centre of gravity UNLESS you're experiencing prop slap like I did. In that case move the mid-float ahead of the CG.

  • OPTIONAL - Coat the entire floats in two-part polyurethane marine paint. This will lessen the chance of water intake through micro-holes common in FDM 3D printing. 

  • Feel free to edit any components of the floats using the .f3d files using Fusion 360 as you see fit. Quick reminder that Fusion 360 is FREE for personal and educational use. 

  • I will be releasing a video soon that documents my experience with these floats and the mistakes I made. I will also release a short build guide detailing the instructions listed above. Please subscribe to my youtube channel if you see fit and are looking for that build guide. https://www.youtube.com/@FindleyFilms

  • Any feedback is greatly appreciated; please email me at: [email protected] or leave a comment on this post.

  •  Disclaimer: In my tests, I was unable to get my Cub off the water because of the added weight from adding expanding polyurethane foam. However, I do believe that with the use of LW-PLA and thin walls/vase mode, these floats do work. Mine were just unsuccessful because of the foam. 

Tagi