1 / 7
Stylised Elephant Figurine — Supports-Ready, No Assembly — zdjęcie 1
1 / 7

Stylised Elephant Figurine — Supports-Ready, No Assembly

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A chunky, smooth-surfaced elephant figurine with a raised trunk

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
16
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

A simple, solid elephant figurine designed to be an easy, forgiving print

rather than a detail showcase. Rounded, chunky forms, a raised trunk, tusks

and flat-backed ears — no thin or fragile parts, and no assembly.

Printed and verified on a QIDI Plus 4 in PLA at 0.2mm layers. The 3MF

includes the exact profile used for the photographed print.

Supports are required. It stands on four legs, so the belly, the raised

trunk and the undersides of the ears are all overhangs. Tree supports set to

"on build plate only" keep the supports off the model's own surfaces, which

means no scarring on anything you can see once they're snapped off.

Scales well between roughly 55mm and 120mm. Below about 55mm the tusks and

tail start losing definition.

Tagi