Sitting Cat Figurine — Wide Base, Barely Needs Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sitting cat with its tail curled around its paws — a deliberately support-friendly pose with a wide flat base and noth
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A sitting cat figurine designed around how it prints, not just how it looks. The
pose does the work: tail curled around the front paws, thick legs, a wide flat
base, and no outstretched limbs.
That matters more than it sounds. A standing animal puts its entire belly in the
air and needs support under all of it; this one has roughly 2.6 cm² of surface
that genuinely can't self-support, mostly under the chin and where the tail meets
the base. Fewer supports means fewer scars on the surfaces you actually look at.
Printed and verified on a QIDI Plus 4 in PLA at 0.2 mm layers, 500 layers, about
an hour and forty minutes. The 3MF includes the exact profile used.
Scales cleanly between roughly 60 mm and 140 mm. Below that the face detail and
tail separation start to soften on a 0.4 mm nozzle.