Skadis T-Clip System Hotshoe/Coldshoe Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skadis T-Clip System Hotshoe/Coldshoe Mount for Flashes and other camera Gear.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Hotshoe/Coldshoe Mount for hanging little accessories like flashes or remote triggers to the Skadis board. It uses the T-Clip System by @LineArcLine as it is my preferred method of attaching Skadis accessories.
Printed laying on the back with default PLA settings. The included T-Clips are optional to have them flush and not interfere with sliding in and out the devices. Any other flush mount T-Clip remix should be fine as well.
The Pin is extra to be able to print the main body flat on the back for strength and to remove the need for supports. It can be inserted from the front or the back depending on fitment. It is tapered and locks with the layer lines with the engraved ring being the larger side. This Pin prevents the mount from twisting and loosening while removing the need for an extra t-clip.
I'd love to see your Makes and/or Remixes :)