NEJE Multi-Interface Adapter Board Electrical Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective electrical box designed to house the NEJE Multi-Interface Adapter Board.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Protective electrical box designed to house the NEJE Multi-Interface Adapter Board. The case was originally designed for mounting to the Creality Ender 3 V2, but it should also be compatible with standard 4040 aluminum extrusion, using the 20 mm vertical hole spacing.
Features
8 × 3 mm cable slot on the right side for laser and trigger wires
Top opening for the barrel jack
Mounts to 4040 aluminum extrusion (or Creality Ender 3 V2)
Tabs on the cover keep the PCB firmly in place
The PCB is raised a few millimeters to prevent it from shorting against the mounting bolts.
Compatibility
This enclosure has been confirmed to fit an older version of the NEJE board with a single 4-pin connector on the left side. Board dimensions are approximately 53 × 31 mm. I have not tested the newer version of the board, so compatibility with newer revisions is currently unconfirmed.