NEJE Multi-Interface Adapter Board Electrical Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protective electrical box designed to house the NEJE Multi-Interface Adapter Board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Protective electrical box designed to house the NEJE Multi-Interface Adapter Board. The case was originally designed for mounting to the Creality Ender 3 V2, but it should also be compatible with standard 4040 aluminum extrusion, using the 20 mm vertical hole spacing.
Features
8 × 3 mm cable slot on the right side for laser and trigger wires
Top opening for the barrel jack
Mounts to 4040 aluminum extrusion (or Creality Ender 3 V2)
Tabs on the cover keep the PCB firmly in place
The PCB is raised a few millimeters to prevent it from shorting against the mounting bolts.
Compatibility
This enclosure has been confirmed to fit an older version of the NEJE board with a single 4-pin connector on the left side. Board dimensions are approximately 53 × 31 mm. I have not tested the newer version of the board, so compatibility with newer revisions is currently unconfirmed.