AceMagic S1 / SZbox S1 / SZbox S1 / Alternative case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom case for the ACEMAGIC S1, designed for use as a compact 24/7 server with improved airflow and active cooling.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Modular 3D-Printed Server Case for ACEMAGIC S1
I designed this custom modular case for the ACEMAGIC S1 mini PC to use it as a compact 24/7 home server.
The main goal of the redesign was to improve cooling and create a more practical enclosure for continuous operation. I removed the original front display, as it was not needed for server use, and replaced the original enclosure with a custom 3D-printed design.
The case consists of three separate modules:
Middle module — houses the original ACEMAGIC S1 motherboard and electronics.
Bottom module — contains a 140 mm intake fan that supplies fresh air to the system.
Top module — contains a 140 mm exhaust fan that removes hot air from the case.
Both fans are powered directly from the 12 V power supply using a splitter and are controlled by an inexpensive PWM fan controller.
The three modules are assembled using the same type of screws normally used to mount PC fans, making the construction simple and easy to assemble or disassemble.
The result is a compact, modular and highly ventilated enclosure designed specifically for long-term 24/7 server operation.
Note: This is a custom modification of the ACEMAGIC S1 and requires the original motherboard and suitable 140 mm fans, PWM controller and 12 V power connection.
