1 / 2
Bee Swarm Trap Entrance – Print-in-Place, No Assembly
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was a model my father needed for his beekeeping It uses a one inch hole and mounts right to the outside.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Print with standard settings in ASA or PETG
0.2 Layer Height
15% Infill
3 Walls
A simple print-in-place bee swarm entrance designed for use with DIY swarm traps and beekeeping setups.
The entrance features multiple holes for bee access and is designed to print as a single piece with no assembly required. Just slice, print, and install.
