Screwdriver Holder for Multiboard Rail – Adaptive Clamps & Extended Baseplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix with clamps fitted to screwdriver diameters and an extended baseplate for Multipoint Rails / Pegboard Click.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 15
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Screwdriver Holder Multiboard – Multiple Mounts by Stranula.
What's different:
Adaptive clamps – the clamp shape was modified to follow the diameter of typical screwdrivers more closely, so they sit tighter and don't wobble.
Extended baseplate – the base was lengthened to be compatible with the Multipoint Rail system by MultiBuild:
Printing: No supports needed, prints in the same orientation as the original. PLA or PETG both work fine.
Credits to Stranula for the original design and to MultiBuild for the Multipoint Rail system.