Car Plastic Underbelly Rivet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the rivet that goes under most cars. It's useful if yours went missing and you don't feel like buying more.
- Ocena
- 4,667 / 5
- Polubienia
- 971
- Pobrania
- 1518
- Wydruki
- 8
- Wyświetlenia
- 7477
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rivet designed to hold the plastic underbelly of a car up to the chassis, much like the black store-bought version (shown in the cover photo). It was designed with the 2003-2008 Toyota Corolla in mind, but can likely be used on the vast majority of vehicles. I highly recommend that PLA is NOT used to print this, as the heat radiated from roads in most areas can be enough to at least deform it and therefore render it useless.
A good recommendation for filaments:
PETG (any)
Anything else with a heat resistance above 69 degrees Celsius
FULL DISCLOSURE: This is my model. It is also uploaded on Makerworld by an account I own. However, this is my original model.