Virtual Pinball Blower Fan Under-Cabinet Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duct that allows you to mount a blower fan under your Virtual Pinball cabinet, and blows air upward onto the player
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
This is a duct for the Attwood Turbo 4000 4" blower fan sold by Cleveland Software Design (https://www.clevelandsoftwaredesign.com/pinball-parts/p/blower-fan). Note: I am not affiliated with CSD in any way but I am using many of their parts for my virtual pinball machine! They are great, highly recommended.
I wanted a way to mount this blower fan underneath the machine since I had no room on top. I used AI to create the model and as you can see from the pictures, it printed perfectly and looks and works great. It even clears my under-cabinet lighting. Players are often surprised when they feel the blast of wind from below!
The model is sized to fit on the print area of an X1C, and it is intentionally positioned at an angle that allows it to be printed with tree supports under only the bottom port (the round bottom surface) and the mounting flanges. I suggest to use "tree supports (manual)" support mode, then paint supports onto only those surfaces, otherwise the slicer may put extra unnecessary supports inside the model.
I printed with 4 wall loops for strength. Printed in PETG with a PLA support interface, but honestly it would have been fine with just PETG since none of the supported surfaces are visible. I mounted both the duct and the fan to the bottom of my cabinet using #6 3/4" screws.